Wall panel forming machines can be used alone with hydraulic forming knives, or in conjunction with sandwich panel equipment. Wall panel pressing machine (cold storage plug-in type and hidden type)·Use this type of pressing machine to press the male and female openings on both sides of the upper and lower steel plates respectively, which facilitates splicing during plate construction and installation;·The structure of the pressing machine adopts the double-sided wall panel type . One side is fixed and the other side is movable wall panel. The desired theoretical board width can be obtained by adjusting the distance between wall panels; ·Each set of forming rollers consists of two sets of upper and lower rollers, and the rollers are both replaceable and have a certain degree of interchangeability. In each set of rollers, the upper roller is passive, and the lower roller is driven by a motor through a chain; The gap between the rollers can be obtained by adjusting the shaft spacing; The speed of the press is 0-8 meters/min, the speed The speed can be adjusted steplessly to synchronize the speed of the press with the speed of the entire equipment; ·The surface of the press rollers is evenly plated with hard chromium to increase their service life;